Applies to: Z4

Using DentalCAM / ChairsideCAM

The workflow for restoration is as follows:

If you use the STL workflow or the 3Shape Produce workflow, you must use ChairsideCAM / DentalCAM on the CAM computer The computer that is connected to your machine and which runs DentalCAM and DentalCNC..

1. Start up the CAD computer.

2. Access the CAM computer The computer that is connected to your machine and which runs DentalCAM and DentalCNC. of the Z4 with the CAD computer.

    Accessing the CAM computer

3. Switch to DentalCAM.

Information on working with DentalCAM:

 DentalCAM & DentalCNC 8