Applies to: E5

Checking the scope of delivery

The installation steps to operation are:

  • Unpack the machine and ensure that you have received the following items:

Machine, cables, tools

1 

2 

3 

Tools

4 

5 

6 

Dental tools

7 

 

 

Maintenance tools

8 

9 

10 

11 

12 

13 

Spare parts

14 

15 

16 

17 

18 

 

  1. 1 x Machine E5

  2. 1 x Ethernet network cable

  3. 1 x Power cable


  4. 1 x Torque screwdriver 1.5 Nm with bit TX20

  5. 2 x Angle screwdriver

    • 1 x TX10 (orange)

    • 1 x TX25 (blue)

  6. 1 x 5.5 mm wrench to remove a broken tool


  7. 1 x Administrated Tool Board for tool storage


  8. 1 x Spindle service set

  9. 1 x Calibration set:

    • 1 x Micrometer

    • 3 x Calibration blank

    • 1 x AirTool P250-F1-40-T

    • 1 x P200-R1-40-T (starting April 2024)

  10. 1 x Small cleaning brush for the blank holder


  11. 1 x Microfiber cloth

  12. 1 x Drill bit for tool positions (2.8 mm)

  13. 2 x Spare screw for the blank holder


  14. 4 x Cover cap for fixing screws of the A-B axis module

  15. 6 x Caps for blank holder

  16. 1 x Insert for the AirTool


  17. 1 x Tool magazine insert

  18. Fasteners for the top and bottom service covers

    • 4 x Fixing latch plug

    • 4 x Fixing latch socket

    • 4 x Clamping block

    Exchanging the fixing latches and clamping blocks on the upper service cover

    Exchanging the fixing latches and clamping blocks on the lower service cover


Not depicted:

  • 1 x Supplement for unpacking and installing the machine

  • Transport lock

    • 3 x Foam insert

    • 2 x Accessory box

    • 1 x Spindle lock

  • Packing set

    • 1 x Transport carton including floor insert

    • 1 x Top and bottom cushion

    • 5 x Working chamber door stopper

    • 1 x Transport protection cover

    • 1 x Housing protection cover

    • 2 x Straps incl. buckles

    • 4 x Edge protector corners

Unpacking and positioning

What's next?

Connecting the machine