Preparing ChairsideCAM
Before productive use, you must prepare ChairsideCAM .
Some of the following links lead to help articles for DentalCAM. They also apply without change to ChairsideCAM.
Schritt 1: Installation
With Z4 machines, DentalCAM & DentalCNC is pre-installed on the CAM computer supplied.
-
For other machines, install DentalCAM & DentalCNC 8: Installing DentalCAM & DentalCNC
Schritt 2: Activate ChairsideCAM
If you have not already enabled ChairsideCAM during the setup of 3Shape Produce , do so now:
-
Open the DentalCAMapplication settings window with the following icon in the main icon bar:
-
Open the View for general settings with the following icon in the program settings icon bar:
-
Activate the Activate ChairsideCAM option.
-
Save your changes with the following icon:
-
Restart DentalCAM.
-
DentalCAM starts as ChairsideCAM.

Schritt 3: Configure blank types
Limit the list of available blank types to the materials you actually use. This speeds up material selection for each job.
Customizing the material list
Schritt 4: Set root folder for STL data
Set a root folder for your STL files. This allows you to import objects with just a few clicks.
Schritt 5: Store tools used
For all machines except Z4 , you must configure your tools in DentalCNC .
Adding / removing tools and resetting tool life values
Schritt 6: (Optional) Additional configuration steps
Advanced users can make further adjustments:
General application settings of DentalCAM
The configuration of the optional tools can improve your machining results:
Editing machining parameters and optional tools
What's next?
Import your STL file.