Operating the working chamber door and multi-purpose compartment flap
The workflow for restoration is as follows:
→
→
→
→
Open and close working chamber door
NOTICE
Damaging of the machine by operating the working chamber door inappropriately
The working chamber door is operated by electricity. If you manually open or close the working chamber door, you can damage the machine.
- Manually open or close the working chamber door only in case of an emergency.
- Before you manually open or close the working chamber door, read the respective information in the chapter .
Opening and closing the multi-purpose compartment
NOTICE
Damaging of the machine when operating the multi-purpose compartment
If you operate and/or maintain the multi-purpose compartment incorrectly, the machine may get damaged.
- In an emergency, only open and/or close the multi-purpose compartment flap manually. How to proceed in the event of a power failure
- Do not support yourself on the multi-purpose compartment flap. Do not put any objects onto the flap.
- Check regularly if the area below the cooling liquid tank is dry and remove leaked cooling liquid immediately.
When you operate the blank changer with DentalCNC, the multi-purpose compartment opens and closes automatically.
To open the multi-purpose compartment, select the depicted icon in the Machining view in DentalCNC.- The multi-purpose compartment flap swings downwards.
- To close the multi-purpose compartment, select the depicted icon in the Machining view in DentalCNC.
Opening the multi-purpose compartment
What's next?
If you want to mount blanks:
Mounting and removing blanks
If you want to fill cooling liquid:
