Applies to: K5+

Spare and wear parts

Definition of wear parts

Wear parts necessarily wear out or fail during use. They must be replaced within the time intervals specified in the table below. Use these values to determine operating costs, to plan your spare part stock as well as to create individual maintenance and service plans.

Spare part list

In the table below you can find the most important spare parts for your machine.

  • Many included accessories can be ordered as spare parts.

  • Customer Service has an extended list of all spare parts.

Wear part

Self-exchangeable spare part

Part Replacement interval or conditions Description

Tool magazine insert

  • 500 operating hours*

  • Every year*

Exchanging the tool magazine inserts

Collet chuck

  • 1,000 operating hours*

  • Every year*

Cleaning or exchanging the collet chuck of the spindle

Main fuse

  • If defective

Exchanging the main fuse

Power cable

  • If defective

Connecting the machine

Ethernet cable

  • If defective

Connecting the machine

Filter cartridge of compressed air regulator

  • If defective

Checking the compressed air regulator

Compressed air regulator

  • If defective

Checking the compressed air regulator

Clamping system of blank holder

  • If defective

Exchanging the blank holder clamping system

Calibration blank

  • When necessary

Calibrating the axes

Transport lock

  • If defective

Transportation and storage

Carrying aid

  • If defective

Transportation and storage

 

Spindle bearings (requires spindle exchange by customer service)

  • 2,000 operating hours*

Contact customer service.

*These are recommendation guidelines. Depending on the processing material and how well the machine is cleaned, these values may differ.

The more powerful spindle of the K5+ with serial number K5PF... cannot be installed in the K5+ with serial number K5PD... and in the K5.