Applies to: Z4

Spare and wear parts

Definition of wear parts

Wear parts necessarily wear out or fail during use. They must be replaced within the time intervals specified in the table below. Use these values to determine operating costs, to plan your spare part stock as well as to create individual maintenance and service plans.

Spare part list

In the table below you can find the most important spare parts for your machine.

  • Many included accessories can be ordered as spare parts.

  • Customer Service has an extended list of all spare parts.

Wear part

Self-exchangeable spare part

Part Replacement interval or conditions Description

Tool magazine insert

  • 500 operating hours*

  • Every 2 years*

Exchanging the tool magazine inserts

Collet chuck

  • 1,000 operating hours*

  • Every year*

Cleaning or exchanging the collet chuck of the spindle

Blank holder collet chuck

  • 1,000 operating hours*

  • Every 2 years*

Cleaning the collet chuck of the blank holder

View window wiper

  • 200 operating hours*

Exchanging the view window wiper

Coupling of the cooling liquid tank

  • 1,000 operating hours*

  • Every year*

Kupplung des Kühlflüssigkeitsbehälters reinigen oder tauschen

 

Spindle bearings (requires spindle exchange by customer service)

  • 1,000 operating hours*

Contact customer service.

 

Cooling liquid pump

  • 1,000 operating hours*

Contact customer service.

 

Air intake filter

  • 1,000 operating hours*

Contact customer service.

*These are recommendation guidelines. Depending on the processing material and how well the machine is cleaned, these values may differ.