Applies to: E3

Starting, interrupting, canceling jobs

You control and start manufacturing with DentalCNC. In this chapter, we will give you a brief overview. For the complete instructions, see the documentation for DentalCNC.

Starting jobs

1. Ensure the following:
• You created a job on your CAM computer The computer that is connected to your machine and which runs DentalCAM and DentalCNC.. It has been transferred to DentalCNC.
• The required tool is in the collet chuck and is neither worn nor damaged. It was also added to the virtual tool magazine in DentalCNC.
• The required blank is mounted.
2. Close the working chamber door.

3. Proceed as follows:

   Start machining via the depicted icon in DentalCNC.

   or

   Start the job with the start button.

Interrupt and continue machining

Interrupting the machining process

1. Press the Start button.

• DentalCNC interrupts the machining. A dialog window opens.

  You can open the working chamber door.

2. Recommendation: Leave the blank in the holder.

Continuing the machining process

1. Close the working chamber door.

2. DentalCNC: Confirm the current message.

Aborting machining

1. DentalCNC: Select the depicted icon.

2. Confirm the current message.
• The following happens:
  1. Machining stops immediately.
  2. The spindle moves to its default position.

  You can open the working chamber door.