Error code -1000 or -3000 – Error while loading the blank

Did the blank in the blank carriage collide with a blank in the blank magazine?

How to check this:

1. Open the blank magazine Part of the blank changer in which you store the blanks for automatic loading. door.
2. Open the working chamber door.
3. Check if the blank in the blank changer Machine component which stores multiple blanks in a magazine and which can automatically load them into the working chamber.. When using the search, use a blank changer or a blank magazine instead carriage has collided with a blank in the blank magazine Part of the blank changer in which you store the blanks for automatic loading..

Is the blank magazine soiled?

Have you recently cleaned the release plate (S2) or the release bolts (S5)?

The S2 and S5 use different mechanisms to release the blank frames during loading and unloading.

• S2 1 x Release plate
• S5 4 x Release bolts

(a) S2: Releasing the release plate (marked orange); (b) S5: Release bolt (marked yellow)

Does cleaning the release plate or release bolts solve the issue?

The S2 and S5 use different mechanisms to release the blank frames during loading and unloading.

• S2 1 x Release plate
• S5 4 x Release bolts

How to check this:

S2

1. Clean the release plate.  S2: Cleaning the release plate of the blank changer

When reinserting the cover plate, do not forget to attach the washers.

2. Test the blank changer Machine component which stores multiple blanks in a magazine and which can automatically load them into the working chamber.. When using the search, use a blank changer or a blank magazine instead:
1. Mount blanks of different materials to all blank magazine Part of the blank changer in which you store the blanks for automatic loading. slots.
• If the following applies, the blank changer Machine component which stores multiple blanks in a magazine and which can automatically load them into the working chamber.. When using the search, use a blank changer or a blank magazine instead test is successful:
1. All blanks were successfully loaded and unloaded.
2. The blank changer Machine component which stores multiple blanks in a magazine and which can automatically load them into the working chamber.. When using the search, use a blank changer or a blank magazine instead carriage and blank changer Machine component which stores multiple blanks in a magazine and which can automatically load them into the working chamber.. When using the search, use a blank changer or a blank magazine instead flap moved steadily and smoothly.

S5

1. Close the working chamber door.
2. Move the axes into the cleaning position by selecting the depicted icon in the Machining view in DentalCNC.
• The blank changer Machine component which stores multiple blanks in a magazine and which can automatically load them into the working chamber.. When using the search, use a blank changer or a blank magazine instead flap opens and the 4 bolts move upwards.
3. Open the working chamber door.
4. Clean the following components:
   • Both sides of the blank changer Machine component which stores multiple blanks in a magazine and which can automatically load them into the working chamber.. When using the search, use a blank changer or a blank magazine instead flap (marked orange)
   • The bottom surface between the working chamber and the blank magazine Part of the blank changer in which you store the blanks for automatic loading. (marked green)
   • The 4 release bolts (marked yellow)


The blank changer Machine component which stores multiple blanks in a magazine and which can automatically load them into the working chamber.. When using the search, use a blank changer or a blank magazine instead flap (marked orange), the bottom surface (marked green), the 4 release bolts (marked yellow)

5. Close the working chamber door.
6. Confirm the message in DentalCNC.
• The release bolts move downwards and the blank changer Machine component which stores multiple blanks in a magazine and which can automatically load them into the working chamber.. When using the search, use a blank changer or a blank magazine instead flap closes.
7. Move the axes into the default position by selecting the depicted icon in the Machining view in DentalCNC.
8. Test the blank changer Machine component which stores multiple blanks in a magazine and which can automatically load them into the working chamber.. When using the search, use a blank changer or a blank magazine instead:
1. Mount blanks of different materials to all blank magazine Part of the blank changer in which you store the blanks for automatic loading. slots.
• If the following applies, the blank changer Machine component which stores multiple blanks in a magazine and which can automatically load them into the working chamber.. When using the search, use a blank changer or a blank magazine instead test is successful:
1. All blanks were successfully loaded and unloaded.
2. The blank changer Machine component which stores multiple blanks in a magazine and which can automatically load them into the working chamber.. When using the search, use a blank changer or a blank magazine instead carriage and blank changer Machine component which stores multiple blanks in a magazine and which can automatically load them into the working chamber.. When using the search, use a blank changer or a blank magazine instead flap moved steadily and smoothly.
9. If the blank magazine Part of the blank changer in which you store the blanks for automatic loading. test was not successful: Contact customer service.

Only S2: Did you reinstall the cover plate correctly after cleaning the release plate?

When reinstalling the cover plate, especially the washers are often forgotten.

How to check this:

• Remove and reinstall the cover plate according to the instructions.  S2: Cleaning the release plate of the blank changer

Are the blank changer carriage and blank changer flap blocked?

How to check this:

1. Open the working chamber door.
2. Open the blank magazine Part of the blank changer in which you store the blanks for automatic loading. door.
3. Check if there are any objects that prevent the blank changer Machine component which stores multiple blanks in a magazine and which can automatically load them into the working chamber.. When using the search, use a blank changer or a blank magazine instead flap (marked orange) from opening and / or closing.


Blank changer Machine component which stores multiple blanks in a magazine and which can automatically load them into the working chamber.. When using the search, use a blank changer or a blank magazine instead flap (marked orange)

4. Check if there are any objects in the travel range of the carriage in the working chamber and blank magazine Part of the blank changer in which you store the blanks for automatic loading..

Is the mechanism of the blank changer flap damaged?

How to check this:

1. Close the working chamber door.
2. Move the axes into the cleaning position by selecting the depicted icon in the Machining view in DentalCNC.
• The blank changer Machine component which stores multiple blanks in a magazine and which can automatically load them into the working chamber.. When using the search, use a blank changer or a blank magazine instead flap opens.
3. Disconnect the machine from the external compressed air supply.
• The blank changer Machine component which stores multiple blanks in a magazine and which can automatically load them into the working chamber.. When using the search, use a blank changer or a blank magazine instead flap closes slowly. A small gap remains. This does not indicate that there is a malfunction.
4. Open the working chamber door.
5. Open the blank changer Machine component which stores multiple blanks in a magazine and which can automatically load them into the working chamber.. When using the search, use a blank changer or a blank magazine instead flap (marked orange) by pressing against the top side with you finger [1] and pulling the bottom side with your thumb [2].


Manually opening the blank changer Machine component which stores multiple blanks in a magazine and which can automatically load them into the working chamber.. When using the search, use a blank changer or a blank magazine instead flap (marked orange)

6. Fully open and close the blank changer Machine component which stores multiple blanks in a magazine and which can automatically load them into the working chamber.. When using the search, use a blank changer or a blank magazine instead flap with your hand multiple times.
• The flap opens and closes smoothly.
7. Close the blank changer Machine component which stores multiple blanks in a magazine and which can automatically load them into the working chamber.. When using the search, use a blank changer or a blank magazine instead flap.
8. Close the working chamber door.
CAUTION

Risk of injury caused by the fast moving blank changer Machine component which stores multiple blanks in a magazine and which can automatically load them into the working chamber.. When using the search, use a blank changer or a blank magazine instead flap

If the working chamber door is not closed now, the blank changer Machine component which stores multiple blanks in a magazine and which can automatically load them into the working chamber.. When using the search, use a blank changer or a blank magazine instead flap may hit and injure you when you proceed.

9. Connect the machine to the external compressed air supply.
• The blank changer Machine component which stores multiple blanks in a magazine and which can automatically load them into the working chamber.. When using the search, use a blank changer or a blank magazine instead flap opens.
10. Confirm the message in DentalCNC.
• The blank changer Machine component which stores multiple blanks in a magazine and which can automatically load them into the working chamber.. When using the search, use a blank changer or a blank magazine instead flap closes.
11. Move the axes into the default position by selecting the depicted icon in the Machining view in DentalCNC.

Does the corresponding end switch or sensor now send a signal?

How to check this:

1. Manually reset the blank changer Machine component which stores multiple blanks in a magazine and which can automatically load them into the working chamber.. When using the search, use a blank changer or a blank magazine instead to default position. See ‘Manually resetting the blank changer Machine component which stores multiple blanks in a magazine and which can automatically load them into the working chamber.. When using the search, use a blank changer or a blank magazine instead to the default position’.
2. Start DentalCNC.
3. Open the DentalCNC Application settings. For this, select the following icon in the main icon bar: 
4. Open the Machine maintenance view. For this, select the following icon in the lower icon bar: 
5. Verify that the upper icon labeled 10 in the DZ column is highlighted.

Icon which needs to be highlighted (marked orange)

Recommendation

1. Remove the blank from the change position (marked orange) of the blank magazine Part of the blank changer in which you store the blanks for automatic loading.. See ‘Operating the blank changer Machine component which stores multiple blanks in a magazine and which can automatically load them into the working chamber.. When using the search, use a blank changer or a blank magazine instead’.


The change position (marked orange)

2. Reset the blank changer Machine component which stores multiple blanks in a magazine and which can automatically load them into the working chamber.. When using the search, use a blank changer or a blank magazine instead to default position. See ‘Manually resetting the blank changer Machine component which stores multiple blanks in a magazine and which can automatically load them into the working chamber.. When using the search, use a blank changer or a blank magazine instead to the default position’.
3. Test the blank changer Machine component which stores multiple blanks in a magazine and which can automatically load them into the working chamber.. When using the search, use a blank changer or a blank magazine instead:
1. Mount blanks of different materials to all blank magazine Part of the blank changer in which you store the blanks for automatic loading. slots.
• If the following applies, the blank changer Machine component which stores multiple blanks in a magazine and which can automatically load them into the working chamber.. When using the search, use a blank changer or a blank magazine instead test is successful:
1. All blanks were successfully loaded and unloaded.
2. The blank changer Machine component which stores multiple blanks in a magazine and which can automatically load them into the working chamber.. When using the search, use a blank changer or a blank magazine instead carriage and blank changer Machine component which stores multiple blanks in a magazine and which can automatically load them into the working chamber.. When using the search, use a blank changer or a blank magazine instead flap moved steadily and smoothly.
4. If the blank magazine Part of the blank changer in which you store the blanks for automatic loading. test was not successful: Contact customer service.

Recommendation

1. Clean the blank magazine Part of the blank changer in which you store the blanks for automatic loading.. See ‘Cleaning the blank magazine Part of the blank changer in which you store the blanks for automatic loading.’.
2. Test the blank changer Machine component which stores multiple blanks in a magazine and which can automatically load them into the working chamber.. When using the search, use a blank changer or a blank magazine instead:
1. Mount blanks of different materials to all blank magazine Part of the blank changer in which you store the blanks for automatic loading. slots.
• If the following applies, the blank changer Machine component which stores multiple blanks in a magazine and which can automatically load them into the working chamber.. When using the search, use a blank changer or a blank magazine instead test is successful:
1. All blanks were successfully loaded and unloaded.
2. The blank changer Machine component which stores multiple blanks in a magazine and which can automatically load them into the working chamber.. When using the search, use a blank changer or a blank magazine instead carriage and blank changer Machine component which stores multiple blanks in a magazine and which can automatically load them into the working chamber.. When using the search, use a blank changer or a blank magazine instead flap moved steadily and smoothly.

Recommendation

1. If components (washers etc.) are missing, do not use the blank changer Machine component which stores multiple blanks in a magazine and which can automatically load them into the working chamber.. When using the search, use a blank changer or a blank magazine instead. Contact customer service.

If you were able to properly install the cover plate, continue as follows:

2. Test the blank changer Machine component which stores multiple blanks in a magazine and which can automatically load them into the working chamber.. When using the search, use a blank changer or a blank magazine instead:
1. Mount blanks of different materials to all blank magazine Part of the blank changer in which you store the blanks for automatic loading. slots.
• If the following applies, the blank changer Machine component which stores multiple blanks in a magazine and which can automatically load them into the working chamber.. When using the search, use a blank changer or a blank magazine instead test is successful:
1. All blanks were successfully loaded and unloaded.
2. The blank changer Machine component which stores multiple blanks in a magazine and which can automatically load them into the working chamber.. When using the search, use a blank changer or a blank magazine instead carriage and blank changer Machine component which stores multiple blanks in a magazine and which can automatically load them into the working chamber.. When using the search, use a blank changer or a blank magazine instead flap moved steadily and smoothly.

Recommendation

• Restart the job.

Recommendation

1. Remove all objects that block the blank changer Machine component which stores multiple blanks in a magazine and which can automatically load them into the working chamber.. When using the search, use a blank changer or a blank magazine instead.
2. Test the blank changer Machine component which stores multiple blanks in a magazine and which can automatically load them into the working chamber.. When using the search, use a blank changer or a blank magazine instead:
1. Mount blanks of different materials to all blank magazine Part of the blank changer in which you store the blanks for automatic loading. slots.
• If the following applies, the blank changer Machine component which stores multiple blanks in a magazine and which can automatically load them into the working chamber.. When using the search, use a blank changer or a blank magazine instead test is successful:
1. All blanks were successfully loaded and unloaded.
2. The blank changer Machine component which stores multiple blanks in a magazine and which can automatically load them into the working chamber.. When using the search, use a blank changer or a blank magazine instead carriage and blank changer Machine component which stores multiple blanks in a magazine and which can automatically load them into the working chamber.. When using the search, use a blank changer or a blank magazine instead flap moved steadily and smoothly.
3. If the blank magazine Part of the blank changer in which you store the blanks for automatic loading. test was not successful: Contact customer service.

Recommendation

Recommendation

Recommendation

It may have been a temporary issue.

1. Test the blank changer Machine component which stores multiple blanks in a magazine and which can automatically load them into the working chamber.. When using the search, use a blank changer or a blank magazine instead:
1. Mount blanks of different materials to all blank magazine Part of the blank changer in which you store the blanks for automatic loading. slots.
• If the following applies, the blank changer Machine component which stores multiple blanks in a magazine and which can automatically load them into the working chamber.. When using the search, use a blank changer or a blank magazine instead test is successful:
1. All blanks were successfully loaded and unloaded.
2. The gripper and swivel axis moved steadily and smoothly.
2. If the blank magazine Part of the blank changer in which you store the blanks for automatic loading. test was not successful: Contact customer service.