Applies to: R5

Maintenance table

Several times per day

Action Recommended interval / Terms Procedure / Tools

Check the external pneumatic hoses for damage

Before switching on the machine

Visual check

Check the suction hose for damage

Before switching on the machine

Visual check

Check the cooling liquid

  • Before each wet machining

  • If the flow rate is insufficient

Visual check

Once per day

Action Recommended interval / Terms Procedure / Tools

Checking the compressed air regulator

Before work
Clean or exchange cartridge in case of visible contamination or every 2 years

Checking the compressed air regulator

Performing the daily cleaning

After work

Performing the daily cleaning

Exchanging the cooling liquid and cleaning the cooling liquid tank

  • 10 operating hours

  • If the flow rate is insufficient

Exchanging the cooling liquid and cleaning the cooling liquid tank

Once per week

Action Recommended interval / Terms Procedure / Tools

Performing the weekly cleaning

Once per week

Performing the weekly cleaning

Cleaning the nozzle plate

  • Once per week

  • In case of irregular spray patterns

Cleaning the nozzle plate

Cleaning the collet chuck

  • Once per week

  • In the event of out-of-true running

Cleaning or exchanging the collet chuck of the spindle

Cleaning the multi-purpose compartment

Once per week

Cleaning the machine

Cleaning the housing

Once per week

Cleaning the housing

Every 4 weeks

Action Recommended interval / Terms Procedure / Tools

Cleaning the cooling liquid system

  • 100 operating hours

  • Every 4 weeks

  • If the flow rate is insufficient

Cleaning the cooling liquid system

Replace carbon pellets

Exchange filter: Every 4 weeks

Order new pellets: Every 3 months

Replace carbon pellets

Every 2 years

Action Recommended interval / Terms Procedure / Tools

Preventive maintenance

  • Every 2 years

  • 2,000 operating hours

Contact customer service.

When necessary

Action Recommended interval / Terms Procedure / Tools

Updating the software and firmware

When an update is available

Updating the software and firmware