Applies to: N4+

Unpacking and positioning

Choosing the installation site

The installation site must meet the limit values and requirements in chapter Technical data.

 Technical data

Unpacking the machine

1. Remove the screws (marked orange) that secure the lid of the transport box.

   The number of screws may vary.

   

2. Lift off the lid (marked orange).

   

3. Remove the accessories.

4. Remove the upper padding (marked orange).

   

5. Remove the screws (marked orange) that secure the crate frame to the pallet.

   The number of screws may vary.

   

6. Lift the crate frame (marked orange) off the pallet.

   

CAUTION!Injuries caused by unsafe transportation

NOTICE! Housing damage by pulling on the housing

7. Grasp the machine on the left and right at the bottom and lift the machine off the pallet. Carry the machine in an upright position.

8. Place the machine on a surface that can carry the weight of the machine.

9. Remove the protective cover.

10. Keep all parts of the packing set for possible service returns.