Technical data
Dimensions (W/D/H)
|
|
Unit |
Value |
|---|---|---|
|
Footprint (approx.) |
mm in |
599 x 266 23.6 x 10.5 |
|
Housing fully closed (approx.) |
mm in |
700 x 444 x 561 27.6 x 17.5 x 22.1 |
|
Minimum required space for operation (approx.) |
mm in |
1050 x 770 x 600 27.6 x 26.9 x 22.1 |
Base system
|
|
Unit |
Value |
|---|---|---|
|
Weight (approx.) |
kg lbs |
106 234 |
|
Axes – Rotational axis A |
|
5 360° / ± 30° |
|
Overvoltage category (IEC 60664-1) |
|
II |
External compressed air supply
|
|
Unit |
Value |
|---|---|---|
|
Min. / max. air pressure |
psi |
6 / 8 90 / 120 |
|
Recommended air pressure |
psi |
7 100 |
|
Compressed air consumption (approx.) – Wet machining
– Dry machining
|
l/min cfm l/min cfm |
30/35 (at 6/8 bar) 1.1/1.2 cfm (at 90/120 psi) 60/73 (at 6/8 bar) 2.1/2.6 (at 90/120 psi) |
|
Air purity (ISO 8573-1:2010) |
|
Solid particles: class 3 Water: class 4 Total oil content: class 3 |
External air extraction system
|
|
Unit |
Value |
|---|---|---|
|
Minimum extraction capacity |
l/min cfm |
3,000 (at 220 hPa) 105.9 (at 3.2 psi) |
|
Suction unit |
|
Designed for the commercial use in the dental sector Equipped with a filter of the filter class M |
Ambient conditions
|
|
Unit |
Value |
|---|---|---|
|
Relative humidity |
|
80 %, non-condensing |
|
Ambient temperature for storage/transport |
°C °F |
‑20 – 60 -4 – 140 |
|
Ambient temperature for operation |
°C °F |
10 – 35 50 – 95 |
|
Location type |
|
Indoor |
|
Maximum height above mean sea level |
m ft |
2000 6561 |
|
Ambient air (IEC 60664-1) |
|
Dust free, pollution degree 2 |
|
Electromagnetic radiation (IEC 61326-1) |
|
Residential, business and commercial areas |
|
Electromagnetic interference (IEC 61326-1) |
|
Industrial environment |
Spindle
|
|
Unit |
Value |
|---|---|---|
|
Model |
|
SFS 300P (synchronous) |
|
Maximum rotational speed |
rpm |
60,000 |
|
Nominal power under continuous operation (S1) |
W |
300 |
|
Nominal power under uninterrupted periodic operation (S6) |
W |
450 |
|
Peak power (Pmax) |
W |
600 |
|
Collet chuck diameter |
mm |
3 |
Sound emission
|
Operating condition |
Unit |
Value |
|---|---|---|
|
Machining |
dB(A) |
77 dB(A) |
|
All other operating conditions |
dB(A) |
<70 dB(A) |
|
Measuring conditions |
Value |
|---|---|
|
Machined material |
CoCr |
|
Condition of the tools |
worn |
|
Measured value |
Sound pressure level (distance: 1 m) |
|
Measurement according to |
ISO 3746, accuracy grade 3 |
Connections
|
|
Unit |
Value |
|---|---|---|
|
Pneumatic connection, push-in fitting (Diameter) |
mm |
6 |
|
Power connector (and maximum power consumption in watts) |
V AC Hz W |
100 – 240 50/60 850, Glass fuse T6,3A L250V |
|
USB port |
|
2.0 A |
|
Data port for supported suction unit or switching unit |
|
Yes |
|
Hose connection for external air extraction system (Diameter) |
mm |
45 |
|
Data port for wet grinding module |
|
Yes |
|
Hose connection for wet grinding module (Diameter) |
mm |
6 |
Pin assignment of the suction unit data port
80 %, non-condensing
- + 24 V, switched, output 1
- + 24 V, switched, output 2 (not used)
- +24 V, continuous
- Rear signal input, output 2 (not used)
- Rear signal input, output 1 (not used)
- Ground (PE)
