Troubleshooting
This chapter provides machine-specific troubleshooting information.
We offer general interactive troubleshooting guides:
Troubleshooting – fix problems yourself
There you will find help on error codes displayed by DentalCNC (E-2, E-6, E58, etc.). This includes the following topics:
-
Problems with tools
-
Inadmissible operating parameters during machining
-
Problems with machine mechanics (axes, end switches, etc.)
Machine-specific notes
How to proceed in the event of a power failure
While the machine is not receiving power, you have no access to the working chamber.
- After a short power failure, restart the machine and the CAM computer
The computer that is connected to your machine and which runs DentalCAM and DentalCNC.. - If you need to access the working chamber in case of a longer power failure, perform an emergency opening of the working chamber door.
