Applies to: E3

Exchanging the cover of the chip container

Watch the video

YouTube video – When viewing this video, personal data is sent to YouTube, LLC, USA. Privacy statement

  1. Have ready:

    • 1 x Spare cover for the chip container

       

      Not shown:

      4 x Oval-head screw (M4 x 10, TX20)

    • 1 x Angle screwdriver TX20

       

  2. Open the working chamber door.
  3. Pull the chip container out of the machine towards the front.
  4. In the chip container, unscrew the 4 screws that secure the chip container cover and remove the cover.

    5.  

     

  5. Pick up the spare cover for the chip container.

  6. Use the 4 screws to firmly screw the cover onto the chip container. While doing so, press the cover downward.

     

  7. Completely push the chip container back into the machine.
  8. Close the working chamber door.