Applies to: DentalCAM & DentalCNC 8.10

Testing the working chamber lighting

How can I make sure that the working chamber lighting has the correct color?

  1. Open the DentalCNC Application settings with the following icon in the main icon bar: 

  2. Open the Machine maintenance view with the following icon in the local icon bar: 

The Machine maintenance view; icon for the working chamber lighting test marked orange

  1. Select the following icon:
    • A window opens.
  2. Test each color of the working chamber lighting For each of the 3 tests, enter the corresponding values in the R, G, B input fields:

    3.  

    		 R G B

    Test “Red”

    255

    0

    0

    Test “Green”

    0

    255

    0

    Test “Blue”

    0

    0

    255
    • During each test, the working chamber lighting shines in the corresponding color.
  3. If the working chamber lighting does not work as described, exchange the defective LED and repeat the test.

    4. We currently offer the following repair instructions on exchanging LEDs for the following machines:

    • Z4
    • R5
    • You have tested the working chamber lighting.