Applies to: DentalCAM & DentalCNC 8.10 / R5 / Z4

Moving the spindle into transport position

How can I move the spindle into the transport lock?

Before you transport the machine, you must re-install the transport lock that was delivered with the machine. The transport lock prevents the spindle and other components from getting damaged during transport. For proper installation, the spindle needs to be moved to its machine-specific transport position.

  1. Open the DentalCNC Application settings with the following icon in the main icon bar

  2. Open the Machine maintenance view with the following icon in the local icon bar

The Machine maintenance view; icon for moving the spindle into transport position marked orange

You can automatically move the spindle to the transport position as follows:

  1. Install the transport lock as shown in the supplement which was delivered with your machine. They are available in our download section.
  2. Close the working chamber door.
  3. Select the following icon:
    • The following happens:
      1. The spindle moves into the transport position.
      2. Z4: The machine shuts down.